The latest statistics that are available from the department of environment show that in 2006 the Irish Fire Service attended 9,394 domestic fires an increase of 2.5% on 2005. Of these 9,394 fires 5,695 were chimney fires an increase of more than 2.8% on the 2005 figure. In 2006 there were 3 fatalities resulting form chimney/solid fuel appliance fires. This accounts for 7% of all fatalities in all fires attended by the Irish Fire Services.
The picture above shows creosote starting to form in the flue.
In Dublin in 2006 there were 317-chimney fire attended by the fire brigade.
In Kildare in 2006 there were 281-chimney fire attended by the fire brigade.
In Meath in 2006 there were 126-chimney fire attended by the fire brigade.
In Kildare in 2006 there were 281-chimney fire attended by the fire brigade.
In Meath in 2006 there were 126-chimney fire attended by the fire brigade.
In Wicklow in 2006 there were 33-chimney fire attended by the fire brigade
The content below is taken form a public safety bulletin from the Chimney Safety Institute of America.
Creosote & Chimney Fires: What You Must Know
Fireplaces and wood stoves are designed to safely contain wood-fuel fires, while providing heat for a home. The chimneys that serve them have the job of expelling the byproducts of combustion – the substances produced when wood burns. These include smoke, water vapor, gases, unburned wood particles, hydrocarbon volatile, tar fog and assorted minerals. As these substances exit the fireplace or wood stove, and flow up into the relatively cooler chimney, condensation occurs. The resulting residue that sticks to the inner walls of the chimney is called creosote. Creosote is black or brown in appearance. It can be crusty and flaky…tar-like, drippy and sticky…or shiny and hardened. Often, all forms will occur in one chimney system. Whatever form it takes, creosote is highly combustible. If it builds up in sufficient quantities – and catches fire inside the chimney flue instead of the firebox of the fireplace or wood stove – the result will be a chimney fire. Although any amount of creosote can burn, sweeps are concerned when creosote builds up in sufficient quantities to sustain a long, hot, destructive chimney fire. Certain conditions encourage the buildup of creosote. Simply put, restricted air supply, unseasoned wood and cooler-than normal chimney temperatures are all factors that can accelerate the buildup of creosote on chimney flue walls. Air supplies on fireplaces may be restricted by closed glass doors or by failure to open the damper wide enough to move heated smoke up the chimney rapidly (the longer the smoke’s "residence time" in the flue, the more likely is it that creosote will form). A wood stove’s air supply can be limited by closing down the stove damper or air inlets too soon and too much, and by improperly using the stovepipe damper to restrict air movement. Burning unseasoned wood – because so much energy is used initially just to drive off the water trapped in the cells of the logs– keeps the resulting smoke cooler, as it moves through the system, than if dried seasoned wood is used. In the case of wood stoves, fully packed loads of wood (that give large cool fires and 8 or 10 hour burn times) also contribute to creosote buildup. Cool flue temperatures speed creosote production, too. Condensation of the unburned byproducts of combustion occurs more rapidly in an exterior chimney, for example, than in a chimney that runs through the center of a house and exposes only the upper reaches of the flue to the elements.
How Chimney Fires Hurt Chimneys
Masonry Chimneys. When chimney fires occur in masonry chimneys – whether the flues are an older, unlined type or are tile lined to meet current safety codes – the high temperatures at which they burn (around 2000°F) can "melt mortar, crack tiles, cause liners to collapse and damage the outer masonry material". Most often, tiles crack and mortar is displaced, which provides a pathway for flames to reach the combustible wood frame of the house. One chimney fire may not harm a home. A second can burn it down.
